Pengaruh Waktu Paparan UV terhadap Nilai Sudut Kontak Lapisan Polistiren(Ps)

Mira Setiana

Abstract


Polistiren(Ps) merupakan bahan polimer yang banyak digunakan untuk aplikasi sensor karena sifat viskoelastiknya. Permukaan lapisan Ps yang bersifat hidrofilik sangat diperlukan dalam aplikasi sensor untuk cairan. Permukaan yang bersifat hidrofilik dapat diperoleh dengan memodifikasi permukaan lapisan Ps menggunakan paparan sinar UV. Pada penelitian ini, waktu penyinaran UV yang digunakan adalah selama 30 menit, 60 menit, 90 menit, dan 120 menit. Variasi waktu penyinaran UV bertujuan untuk mengetahui perubahan sifat permukaan Ps. Hidrofilisitas polimer terkait dengan berat molekul dan polaritas polimer. Hal ini dapat dianalisis dengan menggunakan karakterisasi nilai sudut kontak lapisan Ps. Karakterisasi lapisan Ps setelah dipapari sinar UV dilakukan dengan menganalisis perubahan nilai sudut kontak. Berdasarkan percobaan yang telah dilakukan didapatkan bahwa semakin lama penyinaran UV menyebabkan semakin rendahnya nilai sudut kontak lapisan Ps. Nilai sudut kontak paling rendah yang dihasilkan adalah sebesar 55,801o ±0,0563o setelah dipapari sinar UV selama 120 menit.

 


Keywords


Polistiren, properti permukaan, radiasi UV

Full Text:

PDF

References


Avossa, Joshua et al. 2019. “Electrospinning of Polystyrene/Polyhydroxybutyrate Nanofibers Doped with Porphyrin and Graphene for Chemiresistor Gas Sensors.” Nanomaterials 9(2).

Begum, Sabana Ara, Ajay Vasudeo Rane, and Krishnan Kanny. 2019. Compatibilization of Polymer Blends: Micro and Nano Scale Phase Morphologies, Interphase Characterization, and Properties Applications of Compatibilized Polymer Blends in Automobile Industry. Elsevier Inc. http://dx.doi.org/10.1016/B978-0-12-816006-0.00020-7.

Bhadra, Jolly et al. 2019. “Fabrication of Polyaniline-Graphene/Polystyrene Nanocomposites for Flexible Gas Sensors.” RSC Advances 9(22): 12496–506.

Jaganathan, Saravana Kumar et al. 2015. “Review: Radiation-Induced Surface Modification of Polymers for Biomaterial Application.” Journal of Materials Science 50(5): 2007–18.

Mielczarski, J. A., Y. L. Jeyachandran, E. Mielczarski, and B. Rai. 2011. “Modification of Polystyrene Surface in Aqueous Solutions.” Journal of Colloid and Interface Science 362(2): 532–39. http://dx.doi.org/10.1016/j.jcis.2011.05.068.

Murakami, Takurou N. et al. 2003. “Surface Modification of Polystyrene and Poly(Methyl Methacrylate) by Active Oxygen Treatment.” Colloids and Surfaces B: Biointerfaces 29(2–3): 171–79.

Sakti, Setyawan P., Layli Amaliya, Nike F. Khusnah, and Masruroh Masruroh. 2017. “Effect Of Uv Radiation Duration And Molecular Weight To Hydrophobicity And Surface Roughness Of Polystyrene Coating On QCM SENSOR.” Jurnal Teknologi 79(3): 61–67. https://jurnalteknologi.utm.my/index.php/jurnalteknologi/article/view/9961.

Sakti, Setyawan P., and Putri S. Arinda. 2019. “Effect of the Polystyrene Surface Hydrophobicity on QCM Sensor Resonance Frequency in Contact with Water-Glycerol Mixture.” Journal of Physics: Conference Series 1153(1).

Setiana, Mira, Tyas N. Zafirah, and Setyawan P. Sakti. 2020. “The Response of QCM Sensor Coated with Polystyrene in Contact with Potassium Chloride Solution.” Materials Today: Proceedings (xxxx). https://doi.org/10.1016/j.matpr.2020.11.443.

Shin, Joongmin, Xiaojing Liu, Naveen Chikthimmah, and Youn Suk Lee. 2016. “Polymer Surface Modification Using UV Treatment for Attachment of Natamycin and the Potential Applications for Conventional Food Cling Wrap (LDPE).” Applied Surface Science 386: 276–84. http://dx.doi.org/10.1016/j.apsusc.2016.05.158.

Sikandar Shah, Syed, Imtiaz Ahmad, and Muhammad Ishaq. 2017. “Degradation Study of Used Polystyrene with UV Irradiation.” Advanced Material Science 2(3).

Thormann, Esben, Adam C. Simonsen, Per L. Hansen, and Ole G. Mouritsen. 2008. “Interactions between a Polystyrene Particle and Hydrophilic and Hydrophobic Surfaces in Aqueous Solutions.” Langmuir 24(14): 7278–84.

Weibel, Daniel Eduardo et al. 2009. “Ultraviolet-Induced Surface Modification of Polyurethane Films in the Presence of Oxygen or Acrylic Acid Vapours.” Thin Solid Films 517(18): 5489–95. http://dx.doi.org/10.1016/j.tsf.2009.03.204.

Yousif, Emad, and Raghad Haddad. 2013. “Photodegradation and Photostabilization of Polymers, Especially Polystyrene: Review.” SpringerPlus 2(1): 1–32.

Zhang, D, S M Dougal, and M S Yeganeh. 2000. “Effects of UV Irradiation and Plasma Treatment on a Polystyrene Surface Studied ….” Langmuir (9): 4528–32. http://pubs.acs.org/doi/abs/10.1021/la991353i%5Cnpapers://0bb92f14-cf85-4889-8969-bc9f5c4a5634/Paper/p6863.




DOI: https://doi.org/10.24114/jiaf.v8i4.39653

Article Metrics

Abstract view : 125 times
PDF - 105 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

P-ISSN : 2461-1247     |       E-ISSN : 2477-5142

Flag Counter