PENINGKATAN SIFAT MEKANIK DAN TERMAL KAYU KELAPA SAWIT DENGAN TEKNIK KOMPREGNASI REAKTIF
Abstract
Characterization of Oil Palm Trunks (OPT) in height rod
different OPT that compregnated with polystyrene resin modifications
have been done, polystyrene resins modified with acrylic acid and benzoyl peroxide incorporated into the OPT pore size 15x2x2 cm
3 shaped beam that is placed in the compregnator has been modified with -5 atm pressure for 15 minutes. Based on the tensile tests conducted showed that the optimum mechanical properties of the OPT on the bottom of the stem height. with the addition of 20% resin. Similarly, the thermal properties OPT marked increases with increasing temperature degradation of OPT compregnated modified polystyrene resin at a concentration of 20%. From the above two tests showed that OPT improved quality of prior treatment compregnation, analysis of thermal degradation by using Thermogravimetry
Keywords
Full Text:
PDFReferences
Abidin Y, (2009) Tesis Master, Pressure
and temperature influence on the
compregnation
process
on
mechanical properties of oil palm
trunk, Teknik Pertanian, Unand.
Departemen Pertanian, statistik
Pertanian, 2010
Hashim, R., Said, N., Lamaming, J.,
Baskaran.,Sulaiman, O., Sato, M.,
Hiziroglu, S and Sugimoto, T. 2011.
Influence of Press Temperature On
The Properties of Binderless Particle
Board Made From Oil Palm Trunk.
Journal Of Material and Design. 32:
Hoong, Y.B and Paridah, M.T. 2013.
Development a New Method for
Pilot Scale Production of High Grade Oil Palm Plywood: Effect of HotPressing
Time. Journal Material and
Design. 45: 145
H’ng, P.S., Chai, L.Y., Tay, P.W., Wong,
S.Y., Wong, W.Z., Chow, M.J., and
Chai, E.W. 2013. Urea Formaldehyde
Impregnated Oil Palm Trunk as Core
Layer for Three Layer Board. Journal
of Material and Design.50: 457
Loh, Y.F., Paridah, M.T., Hoong, Y.B.,
Yoong, A.C.C. 2011. Effect of
Treatment With Low Molecular
Weight Phenol Formaldehyde Resin
On the Surface Characteristics of Oil
Palm (Elaeisquineensis) Stem Veneer.
Journal Material and Design.32: 2277.
Nurfajriani, Hafni, (2011) Pemanfaatan
Limbah KKS dengan Teknik
Impregnasi, Laporan akhir Research
Grant Unimed, Medan
Yaolin Zhang,1,2 S. Y. Zhang,1,2 Ying Hei
Chui,2 Hui Wan,1 Mosto Bousmina3
(2006) Wood Plastic Composites by Melt
Impregnation: Polymer
Retention and Hardness. Journal of
Applied polymer Sience, Vol. 102,
-1680.
Zaini, M.J, M Y A Fuad, M S Mansor, dan
J Mustafah, (1996) The effect of Filler
Content and Size on The Mechanical
Properties of Polypropilene Oil Palm
Wood Flour Composite. Polymer
International, 40 (1), 51-55.
Zaini, M.J, M Y A Fuad, M S Mansor, dan
J Mustafah, (1996) Application of Oil
Palm Wood Flour as Filler in
Polypropylene, Polymer Journal, 26 (5),
-642.
Zoja Bednarek1, Agnieszka KaliszukWietecka.
(2007) Analysis of The
Fire-Protection
Impregnation
Influence On Wood Strength. Journal
of Civil Engineering and
Management. Vol. XIII. No 2. 79-85.
Article Metrics
Abstract view : 131 timesPDF - 137 times
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution 4.0 International License.