slot gacor slot gacor hari ini slot gacor 2025 demo slot pg slot gacor slot gacor
Submissions

Submissions

Online Submissions

Already have a Username/Password for Jurnal Pendidikan Fisika?
Go to Login

Need a Username/Password?
Go to Registration

Registration and login are required to submit items online and to check the status of current submissions.

 

Author Guidelines

Author Guidelines

The author must send the manuscript online by first registering as an author to the website  https://jurnal.unimed.ac.id/2012/index.php/jpf/user/register

for every submitted article, the author is obliged to follow the terms and conditions in accordance with Style Guide ofJurnal Pendidikan Fisika (can be downloaded on the Style Guide page)

Instructions for author of Jurnal Pendidikan Fisika

  • The text submitted by the author is the original scientific paper, has never been published, and is not being submitted for publication in other media / journals.
  • The journal reports significant new findings related to physics applications and education physics, including : Learning Models, Media Learning Development, Lerning Methods, Experimental Research, Qualitative Research, Quantitative Research, Learning Materials Development, Learning Evaluation, Literature Study.
  • Scripts can be written either in Indonesian and English (abstract only). The manuscript is written with Times New Roman of font 10 with single (1) spacing and single column format.
  • Article Format has met theArticle Template Jurnal Pendidikan Fisika
  • The article must be under 20 % check by plagiarism software
  • The article does not contain the results of plagiarism, falsification, and fabrication of data.
  • References at least 15 articles (required with DOI article) and must used manager Reference (mendeley, etc.)

Paper Title
This is your opportunity to attract the readers attention. Remember that readers are the potential authors who will cite your article. Identify the main issue of the paper. Begin with the subject of the paper. The title should be accurate, unambiguous, specific, and complete. Do not contain infrequently-used abbreviations.

The title of the paper should be in 12 pt bold Font Times New Roman and be centered. The title should have 0 pts space above and 0 pts below

Authors Name and Affiliations
Write Author(s) names without a title and professional positions such as Prof, Dr, etc. Do not abbreviate your last/family name. Always give your First and Last names. Write clear affiliation of all Authors. Affiliation includes a name of department/unit, (faculty), a name of university, address, country. Please indicate Corresponding Author (include email address) by adding an email symbol in superscript behind the name. 

Author names should be bold in 12 pt Times New Roman with 0 pts above and 0 pts below. Author addresses are superscripted by numerals and centered over both columns of manuscripts. Author affiliations University name / institution / research study should be in 12 pt Times New Roman. The body of the text should commence single lines (24 points) below the last address.

Present/permanent address. If an author has moved since the work described in the article was done, or was visiting at the time, a 'Present address' (or 'Permanent address') may be indicated as a footnote to that author's name. The address at which the author did the work must be retained as the main, affiliation address.start by adding an email symbol and then email, font Times New Roman 11pt.

Abstract
All contributing authors names should be added, and their names arranged in the correct order for publication. A correct email address should be supplied only by the corresponding author. The full name of each author must be present in the exact format they should appear for publication, including or exclude any middle names or initials as required. The affiliation of each contributing author should be correct on their individual author name. 

The criteria of authorship are as follows; Substantial contributions to the conception or design of the work; or the acquisition, analysis, or interpretation of data for the work; Drafting the work or revising it critically for important intellectual content; Final approval of the version to be published; Agreement to be accountable for all aspects of the work in ensuring that questions related to the accuracy or integrity of any part of the work are appropriately investigated and resolved.

Abstract in Indonesian written using TNR-10. Space between lines 1 space. Abstract contains 150-200 words and only consists of 1 paragraph, which contains the objectives, methods, and research results. For keywords wrote in italic and then separated using symbol (;) with maximum are 5 words.

Article Organization The body of articles should be organized (at least) into the IMRaD structure as follow;

  • Introduction contains the background, rationale, and or urgency of the research. References (relevant literature or research), need to be included in this section, in relation to the justification of the urgency of the research, the emergence of research problems, alternative solutions, and the solutions chosen. The way in which the source is written in the text needs to clearly indicate the name of the author and the citation of the source, in the form of the year of publication and the page where the manuscript is located. An example is: ........ research results show that more than 70% of students are not able to recognize authentic problems..... (Retnawati, 2014, p.6). The degree of up-to-date material referred to by looking at the proportion of the last 5 years and referring to the primary library. Problems and objectives, as well as the use of the research are written in a narrative manner in paragraphs, no need to be given a special subtitle. Likewise, operational definitions, if deemed necessary, are also written in a narrative. The introduction is written in TNR-10 upright, with a space of 1. Each paragraph begins with a word that indents into 5 digits, or about 1 cm from the left edge of each column.
  • Methods contains the type of research, time and place of research, targets/targets, research subjects, procedures, instruments and data analysis techniques and other matters related to the research method. targets/targets, research subjects, procedures, data and instruments, and data collection techniques, as well as data analysis techniques and other matters related to the research method can be written in sub-sections, with sub-sub-headings. Sub-subheadings do not need to be notated, but written in lowercase starting with a capital letter, TNR-10 unbold, left aligned. Especially for qualitative research, the time and place of the research need to be clearly stated (for quantitative research, it is also necessary). The research target/subject (for qualitative research) or sample-population (for quantitative research) needs to be clearly described in this section. It is also necessary to write down the technique of obtaining the subject (qualitative research) and or the sampling technique (quantitative research). Procedures need to be broken down by type his research. How the research is carried out and the data will be obtained, needs to be described in this section. For experimental research, the type of experimental design used should be listed in this section. Types of data, how the data is collected, with which instrument the data collected, and how it is collected, need to be explained clearly in this section. How to interpret the data obtained, in relation to the problems and research objectives, needs to be explained clearly. (Note: Sub-sections can be different, according to the type or research approach used. If there are procedures or steps that are sequential in nature, they can be notated (numbers or letters) according to their position).
  • Results and discussions. Write results in logical sequence. Results with important findings should be present first. When presenting results in a table or figure, do not repeat all those contents in the text. Present only the summary of the text. Describe only new and important aspects of the study. Do not repeat all information from results section or any section above. Present limitations of the study. Write the issues that are new or unsolved, for future research. This section consists of the information on What/How the presented data were produced, no raw data should be present in the article. The produced data are presented in tables, or figures with an explanation of what is the result/findings from the work. The section will also need to address connections between findings and basic concepts or hypothesis made earlier. Authors should also express whether any arguments were needed relating to other works from other researchers. Write implications made by the work related to theoretical or applications.
  • Conclusions. The conclusion should be linked to the title and objectives of the study. Do not make statements not adequately supported by your findings. Write the improvements made to physics education in general. Do not make further discussions, repeat the abstract, nor only list the results of research results. Do not use bulleted points, use paragraphed sentences instead. maximum 100 word.
  • Biographies and Acknowledgments Those who contribute but do not meet all criteria for authorship should not be listed as authors, but they should be acknowledged at the end of the text. Only the names of the persons but not their role should be written under acknowledgement section. Authors must declare all sources of external research funding in their article and a statement to this effect should appear in the Acknowledgements section. Authors who wish to include these items should save them together in the MS Word file to be uploaded with the submission. If they are to be included, a brief professional biography of 100 words maximum should be supplied for each named author.
  • Symbols and units, numbers
    If symbols are defined in a nomenclature section, symbols and units should be listed in alphabetical order with their definition and dimensions in SI units. Please use the SI set of units as much as possible. Wherever the application domain uses a different set of units widely, please minimize the use of non-standard units or non-standard symbols for those units. As examples, the use of a for the year (annum) is depreciated and the use of y is encouraged instead. Similarly, h should be used for hours instead of hr and t instead of ton or tonne. It is important to take care of the case in which them measurement units are typed. E.g. Km does not mean kilometers, but Kelvin-meters.
    When providing numerical values followed by measurement units, please leave a regular space or non-breaking space between each value and the measurement unit. This also includes percentages and degrees Celsius (e.g. 42 % or 35 %, 234 C, 504 K). This rule also applies to the unit for a litre, which is recommended to be capital L. The authors are encouraged to render the numbers according to the International rules, specifying the dot as a decimal separator and the comma as a thousand separator.
  • Equations
    Make sure that placing and numbering of equations are consistent throughout your manuscript.





    Center aligns the equation and put the number of the equation flush-right, using a Right Tab on the right margin. Please reference equations in the text by writing: Eqn. .. (do not use Equation ..) In principle, variables are to be presented in italics.
  • Figures and Tables
    Figures and tables should be originals or sharp prints. Please use the SI set of units as much as possible. Figures and tables should be centered and placed either at the top or at the bottom of the page. Please do not render tables as pictures and please do not use too small font sizes in the illustrations. Please use the following fonts in your illustrations: TNR, Symbol, or use fonts that look similar.
    If your figures and tables are created in a Microsoft Office application (Word, PowerPoint, Excel) then please supply 'as is' in the native format, too. Regardless of the application used other than Microsoft Office, when your electronic artwork is finalized, please 'Save as' or convert the images to one of the following formats (note the resolution requirements for line drawings, halftones, and line/halftone combinations given below):
    • PS (or PDF): Vector drawings, embed all used fonts.
    • TIFF (or JPEG): Color or grayscale photographs (halftones), keep to a minimum of 300 dpi.
    • TIFF (or JPEG): Bitmapped (pure black & white pixels) line drawings, keep to a minimum of 1000 dpi.
    • TIFF (or JPEG): Combinations bitmapped line/half-tone (color or grayscale), keep to a minimum of 500 dpi.
    Set table number and title flush left above table. Horizontal lines should be placed above and below table headings and at the bottom of the table. Vertical lines should be avoided. The title should use TNR-10, with 0 pt before and 6 pt after the paragraph, left-justified at the top of the table. Tables have to be included in the text. If a table is too long to fit one page, the table number and heading should be repeated on the next page before the table is continued. Alternatively the table may be spread over two consecutive pages (first an even numbered, then an odd-numbered page) turned by 90, without repeating the heading.
  • Figure captions
    Fig. 1 Captions should be placed below each illustration, font Book Antiqua, 11 pts. Figures and figure captions should be placed center; two narrow figures may be placed side-by-side.
  • Concerning references
    In order to give our readers a sense of continuity, we encourage you to identify Jurnal Pendidikan Fisika articles of similar research in your papers. Please, do a literature check of the papers published in Jurnal Pendidikan Fisika in recent years at https://jurnal.unimed.ac.id/2012/index.php/jpf/.

    For citation and model citation we are using American Psychiatric Association (APA), you can find it using Mendeley or other reference manager program or using citation machine on the internet, such as http://www.citationmachine.net/apa/cite-a-report/manual.

    References must be listed at the end of the paper. Do not begin them on a new page unless this is absolutely necessary. Authors should ensure that every reference in the text appears in the list of references and vice versa.

    Some examples of how your references should be listed are given at the end of this template in the References section, which will allow you to assemble your reference list according to the correct format and font size. When you are referencing conference proceedings, page numbers should be provided. If proceedings are not available, the lecture identification e.g. lecture number should be provided instead. When you are referencing websites, an author or authoring institution should be provided. The date of the last access should be provided as well.
  • Acknowledgements
    Collate acknowledgments in a separate section at the end of the article before the references and do not, therefore, include them on title page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language help, or proof reading the article, etc.). Acknowledgment must be written in this paper. Using 10 pt font TNR, 6 pt after headings.
  • References
    Astuti, I. A. D., Sumarni, R. A., & Saraswati, D. L. (2017). Pengembangan Media Pembelajaran Fisika Mobile Learning berbasis Android. JPPPK - Jurnal Penelitian & Pengembangan Pendidikan Fisika, 3(1), 57–62. https://doi.org/doi.org/10.21009/1.03108

    Indriani, M., Niswah, C., & Arifin, S. (2017). Pengembangan Lembar Kerja Peserta Didik (LKPD) Berbasis Inkuiri Terbimbing Pada Materi Transformasi Geometri. Jurnal Pendidikan Matematika RAFA, 3(2), 165–180. https://doi.org/10.19109/jpmrafa.v3i2.1739

    Irsalina, A., & Dwiningsih, K. (2018). Practicality Analysis of Developing the Student Worksheet Oriented Blended Learning in Acid Base Material. JKPK (Jurnal Kimia Dan Pendidikan Kimia), 3(3), 171–182. https://doi.org/10.20961/jkpk.v3i3.25648

    Kamasi, N. V. V., & Saruan, T. J. (2020). Mobile Learning (M-Learning) Based Learning Application Design for Elementary School Students. Jurnal Ilmiah Sains, 20(2), 70–77. https://doi.org/10.35799/jis.20.2.2020.27877

 

 

Submission Preparation Checklist

As part of the submission process, authors are required to check off their submission's compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines.

  1. The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
  2. The submission file is in OpenOffice, Microsoft Word, RTF, or WordPerfect document file format.
  3. Where available, URLs for the references have been provided.
  4. The text is single-spaced; uses a 12-point Times New Roman font; employs italics, rather than underlining (except with URL addresses); and all illustrations, figures, and tables are placed within the text at the appropriate points, rather than at the end.
  5. The text adheres to the stylistic and bibliographic requirements outlined in the Author Guidelines, which is found in About the Journal.
  6. If submitting to a peer-reviewed section of the journal, the instructions in Ensuring a Double Blind Review have been followed.
  7. Articles checked for similarity below 20%.
 

Copyright Notice

Jurnal Pendidikan Fisika allow the author(s) to hold the copyright without restrictions and  allow the author(s) to retain publishing rights without restrictions. Jurnal Pendidikan Fisika CC-BY or an equivalent license as the optimal license for the publication, distribution, use, and reuse of scholarly work.

In developing strategy and setting priorities, Jurnal Pendidikan Fisika recognize that free access is better than priced access, libre access is better than free access, and libre under CC-BY or the equivalent is better than libre under more restrictive open licenses. We should achieve what we can when we can. We should not delay achieving free in order to achieve libre, and we should not stop with free when we can achieve libre.

Jurnal Pendidikan Fisika is licensed under a Creative Commons Attribution 4.0 International License.

You are free to:

  • Adapt - remix, transform, and build upon the material for any purpose, even commercially.
  • The licensor cannot revoke these freedoms as long as you follow the license terms.

Copyright without Restrictions

The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.

The submitted papers are assumed to contain no proprietary material unprotected by patent or patent application; responsibility for technical content and for protection of proprietary material rests solely with the author(s) and their organizations and is not the responsibility of the Jurnal Pendidikan Fisika Editorial Board. The main (first/corresponding) author is responsible for ensuring that the article has been seen and approved by all the other authors. It is the responsibility of the author to obtain all necessary copyright release permissions for the use of any copyrighted materials in the manuscript prior to the submission.

 

Privacy Statement

The names and email addresses entered in this journal site will be used exclusively for the stated purposes of this journal and will not be made available for any other purpose or to any other party.

 

Author Fees

This journal charges the following author fees.

Article Submission: 0.00 (IDR)
Authors are required to pay an Article Submission Fee as part of the submission process to contribute to review costs.

Fast-Track Review: 0.00 (IDR)
With the payment of this fee, the review, editorial decision, and author notification on this manuscript is guaranteed to take place within 4 weeks.

Article Publication: 500000.00 (IDR)

If this paper is accepted for publication, you will be asked to pay an Article Publication Fee to cover publications costs.

If you do not have funds to pay such fees, you will have an opportunity to waive each fee. We do not want fees to prevent the publication of worthy work.



slot gacor slot