Practicum design for making bioplastics from uli banana peel (Musa paradisiaca S.) to grow the character of the pancasila student profile in polymer chapter

Alfandi Ahmad, Retno Aliyatul Fikroh

Abstract


The change from the 2013 curriculum to the Merdeka curriculum emphasizes the importance of experiential learning and the Pancasila student profile. However, polymers, a crucial macromolecular sub-material, often lack experimental support in education. This study focuses on selecting polymer materials through practical activities, specifically the creation of bioplastics from uli banana peels (Musa paradisiaca S), to foster the development of Pancasila Student Profile characteristics: collaborative teamwork, critical thinking, and innovation. Using a qualitative descriptive method, the study involves curriculum analysis, practical design, and feasibility assessment. The research revealed that the practical design aligns with the characteristics of high school experiments and produces high-quality bioplastics in terms of absorbency, tensile strength, elongation percentage, and biodegradability. Teacher and student interviews further confirmed the alignment with the Pancasila phase F student profile (class XII), emphasizing cooperation, objective-oriented learning, critical thinking, and innovation. This study establishes a strong connection between curriculum, learning outcomes, and experimental design in uli banana peel starch bioplastics production. Not only does it promote the development of Pancasila student profiles, but it also yields high-quality bioplastics.

Keywords: Bioplastic; Merdeka curriculum; Pancasila; Polymer; Uli banana

 


Full Text:

PDF

References


Abdussamad, Z. (2022). Buku metode penelitian kualitatif. Makassar: Syakir Media Press

Agustin, Y. E., & Padmawijaya, K. S. (2016). Sintesis bioplastik dari kitosan-pati kulit pisang kepok dengan penambahan zat aditif. Jurnal Teknik Kimia, 10(2), 43–51. http://eprints.upnjatim.ac.id/7034

Alawiyah, S. (2020). Pengembangan lembar kerja berbasis proyek pada pemanfaatan limbah kulit pisang (Musa Paradisiaca) sebagai bioplastik. UIN Sunan Gunung Djati Bandung. https://digilib.uinsgd.ac.id/38366/

Alhabsyie, M. I., Surya, A., & Domodite, A. (2020). Olahan pisang uli menjadi pisang crispy. BEMAS: Jurnal Bermasyarakat, 1(1), 33–38. http://dx.doi.org/10.37373/bemas.v1i1.40

Anita, Z., Akbar, F., & Harahap, H. (2013). Pengaruh penambahan gliserol terhadap sifat mekanik film plastik biodegradasi dari pati kulit singkong. Jurnal Teknik Kimia, 2(2), 37-41. https://doi.org/10.32734/jtk.v2i2.1437

Ardyansa, N. J., Ramadhon, A. S. P., & Santi, S. S. (2022). Effect of additional cellulose bacterial from nata de soya and chitosan in bioplastic manufacturing. Journal of Applied Science, Engineering, Technology, and Education, 4(2), 202–209. http://dx.doi.org/10.35877/454RI.asci1133

Assunção Flores, M., & Gago, M. (2020). Teacher education in times of COVID-19 pandemic in Portugal: National, institutional and pedagogical responses. Journal of Education for Teaching, 46(4), 507–516. https://doi.org/10.1080/02607476.2020.1799709

Bahri, S. (2017). Pengembangan kurikulum dasar dan tujuannya. Jurnal Ilmiah Islam Futura, 11(1), 15–34. http://dx.doi.org/10.22373/jiif.v11i1.61

Callister, W. D., & Rethwisch, D. (2018). Mater. Science and Engineering: An Introduction, 10th ed. John Wiley & Sons: New York, NY, USA.

Domene-López, D., García-Quesada, J. C., Martin-Gullon, I., & Montalbán, M. G. (2019). Influence of starch composition and molecular weight on physicochemical properties of biodegradable films. Polymers, 11(7), 1084. https://doi.org/10.3390/polym11071084

Gómez-Aldapa, C. A., Velazquez, G., Gutierrez, M. C., Rangel-Vargas, E., Castro-Rosas, J., & Aguirre-Loredo, R. Y. (2020). Effect of polyvinyl alcohol on the physicochemical properties of biodegradable starch films. Materials Chemistry and Physics, 239, 122027. https://doi.org/10.1016/J.MATCHEMPHYS.2019.122027

He, L., Wang, C., Xing, Y., Zhou, W., Pian, R., Chen, X., & Zhang, Q. (2020). Ensiling characteristics, proteolysis and bacterial community of high-moisture corn stalk and stylo silage prepared with Bauhinia variegate flower. Bioresource Technology, 296, 122336. https://doi.org/10.1016/j.biortech.2019.122336

Hidayah, M. A., & Fikroh, R. A. (2023). Potential analysis of boat lily leaf extract (Rhoeo spathaceae (Sw.) Stearn) as an alternative indicator in acid-base titration of acid-base learning. Jurnal Penelitian Pendidikan IPA, 9(9), 7491–7502. http://dx.doi.org/10.29303/jppipa.v9i9.3306

Hikmah, N. (2015). Pemanfaatan limbah kulit pisang ambon (Musa Paradisiacal) dalam pembuatan plastik biodegradable dengan plasticizer gliserin. Laporan Akhir. Palembang: Politeknik Negeri Sriwijay

Huzaisham, N. A., & Marsi, N. (2020). Utilization of banana (Musa Paradisiaca) peel as bioplastic for planting bag application. International Journal of Advanced Research in Engineering and Technology (IJARET), 11(4), 108-118. https://ssrn.com/abstract=3598064

Kalsum, U., Robiah, R., & Yokasari, Y. (2020). Pembuatan bioplastik dari ampas tahu dan ampas tebu dengan pengaruh penambahan gliserol dan tepung maizena. Jurnal Distilasi, 5(2), 34–37. http://dx.doi.org/10.32502/jd.v5i2.3031

Liu, Z. (2023). A review on the emerging conversion technology of cellulose, starch, lignin, protein and other organics from vegetable-fruit-based waste. International Journal of Biological Macromolecules, 124804. https://doi.org/10.1016/j.ijbiomac.2023.124804

Makarim, N. A. (2022). Sekolah yang mengimpelmentasikan kurikulum merdeka. https://pasjabar.com/2022/02/14/inilah-jumlah- sekolah-yang-telah-menerapkan-kurikulum-merdeka/

Munawaroh, A. (2015). Pemanfaatan tepung kulit Pisang (Musa paradisiaca) dengan variasi penambahan gliserol sebagai bahan alternatif pembuatan bioplastik ramah lingkungan. Universitas Muhammadiyah Surakarta. https://eprints.ums.ac.id/34048

Ningsih, A. R. (2018). Pembuatan e-module polimer sintetis berbasis green chemistry. UIN Sunan Gunung Djati Bandung. https://etheses.uinsgd.ac.id/16944

Nurlita, D., Wikanastri, H., & Yusuf, M. (2017). Karakteristik plastik biodegradable berbasis onggok dan kitosan dengan plastisizer gliserol. Jurnal Pangan dan Gizi, 7(2), 131–139. https://doi.org/10.26714/jpg.7.2.2017.131-139

Priyadarshi, R., & Rhim, J.-W. (2020). Chitosan-based biodegradable functional films for food packaging applications. Innovative Food Science & Emerging Technologies, 62, 102346. https://doi.org/10.1016/j.ifset.2020.102346

Ahmad & Fikroh Bioplastics from uli banana peel Pulungan, Marthalina & Kapita, R & Dewi, Ika Atsari. (2020). Optimisation on the production of biodegradable plastic from starch and cassava peel flour using response surface methodology. IOP Conference Series: Earth and Environmental Science, 475. 012019. https://doi.org/10.1088/1755-1315/475/1/012019

Purbasari, A., Wulandari, A. A., & Marasabessy, F. M. (2020). Sifat mekanis dan fisis bioplastik dari limbah kulit pisang: pengaruh jenis dan konsentrasi pemlastis. Jurnal Kimia dan Kemasan, 42(2), 66–73. http://dx.doi.org/10.24817/jkk.v42i2.5872

Rinaldi, A. S. (2019). Pengaruh penambahan konsentrasi gliserol dan kitosan terhadap sifat mekanik pada pembuatan bioplastik kulit pisangraja nangka (Musa Paradisiaca Forma Typica). Universitas Brawijaya. http://repository.ub.ac.id/181422

Sajjan, A. M., Naik, M. L., Kulkarni, A. S., Rudgi, U. F.-E.-H., Ashwini, M., Shirnalli, G. G., Sharanappa, A., & Kalahal, P. B. (2020). Preparation and characterization of PVA-Ge/PEG-400 biodegradable plastic blend films for packaging applications. Chemical Data Collections, 26, 100338. https://doi.org/10.1016/j.cdc.2020.100338

Santana, R. F., Bonomo, R. C. F., Gandolfi, O. R. R., Rodrigues, L. B., Santos, L. S., dos Santos Pires, A. C., de Oliveira, C. P., da Costa Ilhéu Fontan, R., & Veloso, C. M. (2018). Characterization of starch-based bioplastics from jackfruit seed plasticized with glycerol. Journal of Food Science and Technology, 55, 278–286. https://doi.org/10.1007/s13197-017-2936-6

Selpiana, S., Patricia, P., & Anggraeni, C. P. (2016). Pengaruh penambahan kitosan dan gliserol pada pembuatan bioplastik dari ampas tebu dan ampas tahu. Jurnal Teknik Kimia, 22(1), 18–26. http://ejournal.ft.unsri.ac.id/index.php/jtk/article/view/530

Sugiyono, D. (2013). Metode penelitian pendidikan pendekatan kuantitatif, kualitatif dan R&D. Bandung: CV Alfabeta

Tan, S. X., Ong, H. C., Andriyana, A., Lim, S., Pang, Y. L., Kusumo, F., & Ngoh, G. C. (2022). Characterization and parametric study on mechanical properties enhancement in biodegradable chitosan-reinforced starch-based bioplastic film. Polymers, 14(2), 278. https://doi.org/10.3390/polym14020278

Udjiana, S. S., Hadiantoro, S., Takwanto, A., & Mustikarini, A. W. (2020). Peningkatan karakteristik biodegradable plastics dari kulit pisang candi dengan penambahan filler kalsium silikat dan clay. Jurnal Teknik Kimia dan Lingkungan, 4(2), 175–185. http://dx.doi.org/10.33795/jtkl.v4i2.135




DOI: https://doi.org/10.24114/jpkim.v15i3.48864

Article Metrics

Abstract view : 91 times
PDF - 69 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Alfandi Ahmad, Retno Aliyatul Fikroh

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Jurnal Pendidikan Kimia
Contact: +62 853-1769-2813
Email: jpkim.pps@unimed.ac.id

Jl. Willem Iskandar, Pasar V, Medan Estate, Medan City, North Sumatra Province, Postal Code 20221. Phone/fax: (061) 661 3365 / +62 852-7802-1981.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.