The effect of calcium oxide addition from feather clam shells on porosity and water adsorption geopolymer composite bricks
Abstract
The purpose of this study was to study the effect of adding CaO (calcium oxide) from clam shell ash on physical properties such as density, porosity and water absorption on geopolymer composite bricks. Geopolymer composite bricks are made by mixing sand, geopolymers synthesized from fly ash with NaOH and Na2SiO3 and calcium oxide calcined from feather clam shell which is printed in cylinder form. The bricks are then cured for 28 days and physical tests are carried out in the form of density, water absorption and porosity tests. The results showed that the most optimal addition of CaO is 7.5% for the physical properties of geopolymer composite bricks with a density value of 1.80 gr/cm3, a porosity value of 10.30% and a water absorption capacity of 4.68%. The value has filled the quality standard 1st for bricks set by Indonesian National Standard (SNI).
Keywords: Calcium oxide; Composite bricks; Fly ash; Geopolymer
Full Text:
PDFReferences
Adisty, D. (2008). Sintesis Geopolimer Berbahan Baku Abu Terbang ASTM kelas C. University of Indonesia. Depok.
ASTM C 642-90. (1991). Standard test method for specific gravity, absorption, and voids in hardened concrete. ASTM Standards. USA
Bharatham, H., Zakaria, M. Z. A. B., Perimal, E. K., Yusof, L. M., & Hamid, M. (2014). Mineral and physiochemical evaluation of Cockle shell (Anadara granosa) and other selected Molluscan shell as potential biomaterials. Sains Malaysiana, 43(7), 1023-1029.
Budiningrum, D. S., Kustirini, A., Purnijanto, B., Mahasukma, D., & Utama, T. Y. (2021). Studi experimental kuat tekan beton geopolimer berbahan dasar fly ash PLTU Tanjungjati B Jepara. Bangun Rekaprima, 7(2), 55. https://doi.org/10.32497/bangunrekaprima.v7i2.2997
Chowdhury, S. (2015). Alkali Stabilized Fly Ash: A New Generation Geo-Material (Doctoral dissertation).
Davidovits, J. (1994). Properties of geopolymer cements. In First International Conference on Alkaline Cements and Concretes, 1, pp. 131-149.
Haryanto, A. (2016). Faktor geografis dan konsepsi peran nasional sebagai sumber politik luar negeri Indonesia. Jurnal Hubungan Internasional, 4(2), 136–147. https://doi.org/10.18196/hi.2015.0074.136-147
Husain, S., Permitaria, A., Haryanti, N. H., & Suryajaya. (2019). Affect calcination temperature on formed of calcium silicate from rice husk ash and snail shell. Jurnal Neutrino: Jurnal Fisika dan Aplikasinya, 11(2), 45-51. https://doi.org/10.18860/neu.v11i2.6608
Insani S, P. M., & Rahmatsyah, R. (2021). Analisis pola struktur kalsium karbonat (CaCO3) pada cangkang kerang darah (Anadara granosa) di bukit kerang kabupaten Aceh Tamiang. Jurnal Teori dan Aplikasi Fisika, 9(1), 23–32. https://doi.org/10.23960/jtaf.v9i1.2717
Khater, H. M. (2012). Effect of calcium on geopolymerization of aluminosilicate wastes. Journal of Materials in Civil Engineering, 24(1), 92–101. https://doi.org/10.1061/(asce)mt.1943-5533.0000352
Malik, Y. (2016). Studi Pengaruh Temperatur dan Waktu Curing Terhadap Sifat Fisik–Mekanik Semen Geopolimer Berbasis Slag Ferronickel. Thesis. Materials and Metallurgical Engineering study program. Sepuluh Nopember Institute of Technology. Surabaya.
Nurfajriani, N., Herlinawati, H., Yusuf, M., Siregar, M. I., Yunus, M., & Derlina, D. (2022). Mechanical properties of polyethylene matrix composites with areca fruit peel powder filler (Areca catechu) and sugar cane fiber (Saccharum officinarum L). Journal of Physics: Conference Series, 2193(1), 012058. https://doi.org/10.1088/1742-6596/2193/1/012058
Provis, J. L. & Van Deventer, J. S. J. (Eds.). (2009). Geopolymers: structures, processing, properties and industrial applications. Elsevier.
Puspitasari, W. D., Setyono, F., & Budi, G. S. (2018). Pengaruh penambahan fly ash dan bubuk kulit kerang pada kekuatan tekan pasta semen. Jurnal Dimensi Pratama Teknik Sipil, 7(2), 297-303.
Silaban, R., Dobo, J., & Rahanubun, G. (2022). Proporsi morfometrik dan pola perumbuhan kerang darah (Andara granosa) di daerah intertidal kota Tual. Jurnal Kelautan, 15(2), 143-152. https://doi.org/10.21107/jk.v15i2.13759
Syamsuddin, S. (2019). Uji kuat tekan dan daya serap air pada batako dengan penambahan limbah tulang ikan. JFT : Jurnal Fisika Dan Terapannya, 6(2), 140. https://doi.org/10.24252/jft.v6i2.11693
Samadhi, T. W., & Pratama, P. P. (2018). Pembuatan geopolimer dari metakaolin dan abu terbang. Jurnal Teknik Kimia Indonesia, 12(2), 265. https://doi.org/10.5614/jtki.2013.12.2.6
Sebayang, S., Widyawati, R., & Habibie, M. (2012). Pengaruh abu terbang terhadap sifat-sifat mekanik beton alir ringan alwa. Jurnal Teknik Sipil, 3(1), 247-256.
Standar Nasional Indonesia. (1989). Kualitas dan cara pengujian batu bata beton padat. SK SNI 03-0348-1989.
Tilik, L. F., Fuady, B. H., Suhadi, S., Armaini, R., Firdausa, F., Agusri, M. R., & Hartoyo, P. (2022). The effect of shell as a substitution of coard aggregate with superplasticizer additional on the compression strength of concrete. Atlantis Highlights in Engineering, 9, p. 13-18. https://doi.org/10.2991/ahe.k.220205.003
DOI: https://doi.org/10.24114/jpkim.v15i3.50903
Article Metrics
Abstract view : 61 timesPDF - 25 times
Refbacks
- There are currently no refbacks.
Copyright (c) 2023 Nurfajriani Nurfajriani, Yohansen Wahyudi
This work is licensed under a Creative Commons Attribution 4.0 International License.
Jurnal Pendidikan Kimia
Contact: +62 853-1769-2813
Email: jpkim.pps@unimed.ac.id
Jl. Willem Iskandar, Pasar V, Medan Estate, Medan City, North Sumatra Province, Postal Code 20221. Phone/fax: (061) 661 3365 / +62 852-7802-1981.
This work is licensed under a Creative Commons Attribution 4.0 International License.