Synthesis and characteristics rubber seed oil bioadditive from Sumatera Utara as low pour point of CPO biodiesel

Misdawati Misdawati, Siswadi Siswadi, Muhammad Said Siregar

Abstract


One of the drawbacks of Crude Palm Oil (CPO) biodiesel is that it has high pour point which causes disadvantages in it’s use. North Sumatra is the second largest rubber producer in Indonesia, the use of rubber seeds as a bioadditive to reduce the pour point of CPO biodiesel is one of the right steps. The synthesis of rubber seed oil bioadditives is carried out in two processes; esterification process and transesterification process. This research aims to reduce the pour point of CPO biodiesel by mixing it with bioadditive of rubber seed oil. This study evaluated the effect of composition to find the best combination of biodiesel ratios in the mixture. The research results show that the greater the proportion of bioadditive rubber seed oil, the lower the pour point of the mixed biodiesel. Biodiesel with a low pour point is obtained at 10oC from mixing CPO biodiesel with bioadditive rubber seed oil at a composition of 75:25 and the optimal pour point is -7oC. Performance testing is carried out to differentiate fuel properties and fuel performance. The results show that B15 fuel produces the best performance at a maximum engine speed of 3000 rpm. In this round, a maximum power of 1.5708 kW was obtained, the lowest specific fuel consumption was 517.52 gr/kWh, thermal efficiency was 18.77%; the smallest CO content was 2.808%; HC 185 rpm; CO2 5.28%; NOx 4 ppm.

Keywords


Bioadditive; CPO; Fatty Acid; Linolenic acid; Rubber seed oil

Full Text:

PDF

References


Adam, I. K., Aziz, A. R. A., Heikal, M. R., & Yusup, S. (2017). Performance and Emission Analysis of Rubber Seed Methyl Ester and Antioxidant in a Multicylinder Diesel Engine. Energy & Amp; Fuels, 31(4), 4424–4435. https://doi.org/10.1021/acs.energyfuels.6b02994

Alptekin, E., & Canakci, M. (2009). Characterization of the key fuel properties of methyl ester–diesel fuel blends. Fuel, 88(1), 75–80. https://doi.org/10.1016/j.fuel.2008.05.023

Ayu, D., Aulyana, R., Astuti, E. W., Kusmiyati, K., & Hidayati, N. (2019). Catalytic Transesterification of Used Cooking Oil to Biodiesel: Effect of Oil-Methanol Molar Ratio and Reaction Time. Automotive Experiences, 2(3), 73–77. https://doi.org/10.31603/ae.v2i3.2991

Mohibbeazam, M., Waris, A., & Nahar, N. (2005). Prospects and potential of fatty acid methyl esters of some non-traditional seed oils for use as biodiesel in India. Biomass and Bioenergy, 29(4), 293–302. https://doi.org/10.1016/j.biombioe.2005.05.001

Balasubramanian, D., Hoang, A. T., Papla Venugopal, I., Shanmugam, A., Gao, J., & Wongwuttanasatian, T. (2021). Numerical and experimental evaluation on the pooled effect of waste cooking oil biodiesel/diesel blends and exhaust gas recirculation in a twin-cylinder diesel engine. Fuel, 287, 119815. https://doi.org/10.1016/j.fuel.2020.119815

Bhale, P. V., Deshpande, N. V., & Thombre, S. B. (2009). Improving the low temperature properties of biodiesel fuel. Renewable Energy, 34(3), 794–800. https://doi.org/10.1016/j.renene.2008.04.037

Boonnoun, P., Shotipruk, A., Kanda, H., & Goto, M. (2018). Optimization of rubber seed oil extraction using liquefied dimethyl ether. Chemical Engineering Communications, 206(6), 746–753. https://doi.org/10.1080/00986445.2018.1522502

Bukkarapu, K. R., & Krishnasamy, A. (2022). A critical review on available models to predict engine fuel properties of biodiesel. Renewable and Sustainable Energy Reviews, 155, 111925. https://doi.org/10.1016/j.rser.2021.111925

Demirbas, A. (2008). Relationships derived from physical properties of vegetable oil and biodiesel fuels. Fuel, 87(8–9), 1743–1748. https://doi.org/10.1016/j.fuel.2007.08.007

Franta, B. (2021). Early oil industry disinformation on global warming. Environmental Politics, 30(4), 663–668. https://doi.org/10.1080/09644016.2020.1863703

Ge, J. C., Kim, H. Y., Yoon, S. K., & Choi, N. J. (2020). Optimization of palm oil biodiesel blends and engine operating parameters to improve performance and PM morphology in a common rail direct injection diesel engine. Fuel, 260, 116326. https://doi.org/10.1016/j.fuel.2019.116326

Hadiyanto, H., Aini, A. P., Widayat, W., Kusmiyati, K., Budiman, A., & Roesyadi, A. (2020). Multi-Feedstocks Biodiesel Production from Esterification of Calophyllum inophyllum Oil, Castor Oil, Palm Oil and Waste Cooking Oil. International Journal of Renewable Energy Development, 9(1), 119–123. https://doi.org/10.14710/ijred.9.1.119-123

Hariyanto, R. A. B., Firmansyah, R. A., Burhan, R. Y. P., & Zetra, Y. (2021). Synthesis of Bio-additive for Low Sulphur Diesel: Transesterification of Soybean Oil and Ethylene Glycol using K2CO3 Catalyst. Automotive Experiences, 4(1), 44–50. https://doi.org/10.31603/ae.4694

Kalam, M. A., & Masjuki, H. H. (2008). Testing palm biodiesel and NPAA additives to control NOx and CO while improving efficiency in diesel engines. Biomass and Bioenergy, 32(12), 1116–1122. https://doi.org/10.1016/j.biombioe.2008.02.009

Kaniapan, S., Hassan, S., Ya, H., Patma Nesan, K., & Azeem, M. (2021). The Utilisation of Palm Oil and Oil Palm Residues and the Related Challenges as a Sustainable Alternative in Biofuel, Bioenergy, and Transportation Sector: A Review. Sustainability, 13(6), 3110. https://doi.org/10.3390/su13063110

Knothe, G. (2007). Some aspects of biodiesel oxidative stability. Fuel Processing Technology, 88(7), 669–677. https://doi.org/10.1016/j.fuproc.2007.01.005

Kushayadi, A. G., Suprayudi, M. A., Jusadi, D., & Fauzi, I. A. (2019). Evaluation of rubber seed oil as lipid source in red tilapia (Oreochromis sp.) diet. Aquaculture Research, 51(1), 114–123. https://doi.org/10.1111/are.14352

Mahlia, T. M. I., Syazmi, Z. A. H. S., Mofijur, M., Abas, A. E. P., Bilad, M. R., Ong, H. C., & Silitonga, A. S. (2020). Patent landscape review on biodiesel production: Technology updates. Renewable and Sustainable Energy Reviews, 118, 109526. https://doi.org/10.1016/j.rser.2019.109526

Misdawati, M., Siswadi, S., Dina, S.F., 2024. Characteristic Analysis of Candlenut Oil Methyl Ester As an Alternative Bio Additive To Lower the Pour Point of Cpo 48–55. https://doi.org/10.35261/barometer.v9i1.10945

Misdawati, M., Nasution, M., & Syafiruddin, S. (2013). Synthesis and Characteristic Bioadditive of Rubber Seed Oil as Low Pour Point Biodiesel CPO. In 3rd Syiah Kuala University Annual International Conference 2013, p. 22-27.

Monteiro, M., Ambrozin, A., Liao, L., & Ferreira, A. (2008). Critical review on analytical methods for biodiesel characterization. Talanta, 77(2), 593–605. https://doi.org/10.1016/j.talanta.2008.07.001

Pandiangan, M., Kaban, J., Wirjosentono, B., & Silalahi, J. (2019). Analisis Kandungan Asam Lemak Omega 3 dan Omega 6 pada Minyak Ikan Mas (Cyprinus Carpio). Talenta Conference Series: Science and Technology (ST), 2(1), 37–44. https://doi.org/10.32734/st.v2i1.309

AVSL, S. B., Subramaniapillai, N., Mohamed, M. S. B. K., & Narayanan, A. (2021). Effect of rubber seed oil biodiesel on engine performance and emission analysis. Fuel, 296, 120708. https://doi.org/10.1016/j.fuel.2021.120708

Sarin, R., Sharma, M., Sinharay, S., & Malhotra, R. K. (2007). Jatropha–Palm biodiesel blends: An optimum mix for Asia. Fuel, 86(10–11), 1365–1371. https://doi.org/10.1016/j.fuel.2006.11.040

Wahyono, Y., Hadiyanto, H., Budihardjo, M. A., Hariyono, Y., & Baihaqi, R. A. (2022). Multifeedstock Biodiesel Production from a Blend of Five Oils through Transesterification with Variation of Moles Ratio of Oil: Methanol. International Journal of Technology, 13(3), 606. https://doi.org/10.14716/ijtech.v13i3.4804

Wicakso, D. R., Najma, A. N., & Retnowati, D. A. (2019). Crude biodiesel synthesis from rubber seed oil. Konversi, 7(1), 21. https://doi.org/10.20527/k.v7i1.4872




DOI: https://doi.org/10.24114/jpkim.v16i2.62374

Article Metrics

Abstract view : 143 times
PDF - 34 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Misdawati Misdawati, Siswadi Siswadi, Muhammad Said Siregar

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

Jurnal Pendidikan Kimia
Contact: +62 853-1769-2813
Email: jpkim.pps@unimed.ac.id

Jl. Willem Iskandar, Pasar V, Medan Estate, Medan City, North Sumatra Province, Postal Code 20221. Phone/fax: (061) 661 3365 / +62 852-7802-1981.

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

slot gacor slot