Gera-Stone: Development of Renewable Ceramic Media for Quality Enhancement and Product Diversification of Pundong Potter
DOI:
https://doi.org/10.24114/gr.v15i1.72123Keywords:
Hybrid-Clay, Gera-Stone, Gerabah Pundong, Ceramic Innovation, GlasirAbstract
Traditional pottery centers in Indonesian face challenges related to declining material quality, limited finishing techniques, and low market competitiveness. The Pundong pottery center in Bantul Regency, Yogyakarta, reflects this condition, where products are generally limited to low-fired bisque wares with low functional and economic value. This research aims to develop and evaluate GERA-STONE, a hybrid ceramic material combining local earthenware clay with stoneware to improve product quality and market acceptance. The study employed a participatory research and development (R&D) approach integrated with practice-based research, involving 30 artisans. The research was conducted in three stages: material development, finishing exploration, and product evaluation through direct market testing in a public exhibition. Data were collected through observation, experimentation, discussions, and market testing, and analyzed descriptively. The results show that GERA-STONE improves structural stability, firing performance, and glaze compatibility. Finishing techniques enhance both aesthetic and functional qualities, enabling products to serve as tableware and home décor. Market testing indicates positive consumer responses, with products achieving prices 300–500% higher than conventional pottery. These findings confirm that innovation in material and technique, supported by participatory processes and market evaluation, can significantly enhance product quality and economic value.
References
Candy, L., & Edmonds, E. (2018). Practice-based research in the creative arts: Foundations and futures from the front line. Leonardo, 51(1), 63–69. https://doi.org/https://doi.org/10.1162/LEON_a_01471
Dade, P. (2017). The Potter’s Dictionary of Materials and Techniques. Reference Reviews, 31(1), 34. https://doi.org/https://doi.org/10.1108/RR-09-2016-0235
Dormer, P. (1997). The culture of craft. Manchester University Press.
Fernandez, P., & Jesus, J. (2019). Ceramics and society. A technological approach to archaeological assemblages.
Hutagalung, D. (2019). Eksperimentasi tanah liat lokal sebagai identitas estetik dalam keramik kontemporer. Gorga: Jurnal Seni Rupa, 8(1), 33–42.
Iriaji, I., Rohidi, T. R., Florentinus, T. S., & Kartika, D. S. (2019). Karakteristik sosio-budaya, pergeseran dan pola adaptasi kriya gerabah pagelaran malang. Bahasa Dan Seni: Jurnal Bahasa, Sastra, Seni, Dan Pengajarannya, 47(1), 68–83. https://doi.org/https://doi.org/10.17977/um015v47i12019p068
Israel, B. A., Schulz, A. J., Parker, E. A., & Becker, A. B. (1998). Review of community-based research: assessing partnership approaches to improve public health. Annual Review of Public Health, 19(1), 173–202. https://doi.org/https://doi.org/10.1146/annurev.publhealth.19.1.173
Kamal, F. P., & Granicia, T. (2023). A Crafts-based Contemporary Tableware Design Derived from Artisanal Pottery Practice of Penujak Village, Lombok. Jurnal Desain Indonesia., 5(2), 89–100. https://doi.org/https://doi.org/10.52265/jdi.v5i2.275
Leavy, P. (2022). Research design: Quantitative, qualitative, mixed methods, arts-based, and community-based participatory research approaches. Guilford publications.
Manzini, E. (2015). Design, when everybody designs: An introduction to design for social innovation. MIT press.
Minkler, M. (2004). Ethical challenges for the “outside” researcher in community-based participatory research. Health Education & Behavior, 31(6), 684–697. https://doi.org/https://doi.org/10.1177/1090198104269566
Nasution, R. (2017). Eksplorasi glasir transparan suhu tinggi pada keramik stoneware. Gorga: Jurnal Seni Rupa, 6(2), 89–98.
Nelson, R. (2013). Practice as research in the arts: Principles, protocols, pedagogies, resistances. Springer.
Peterson, S., & Peterson, J. (2003). The craft and art of clay: a complete potter’s handbook. Laurence King Publishing.
Raharjo, T. (2009). Globalisasi Seni kerajinan keramik kasongan. Program Pascasarjana Institut Seni Indonesia Yogyakarta.
Rhodes, D. (2015). Clay and Glazes for the Potter. Ravenio Books.
Rifai, M., & Hartono, S. B. (2017). Pengaruh proses Sintering Pada temperatur 800 CTerhadap kekerasan dan Kekuatan bending Pada Produk Gerabah. TRAKSI, 16(2). https://doi.org/https://doi.org/10.26714/traksi.16.2.2016.%25p
Risatti, H. (2009). A theory of craft: function and aesthetic expression. Univ of North Carolina Press.
Sihotang, E. (2016). Keramik sebagai media transformasi budaya dan ekonomi kreatif. Gorga: Jurnal Seni Rupa, 5(1), 45–54.
Simanjuntak, T. (2018). Inovasi material keramik berbasis tanah lokal untuk peningkatan nilai guna dan estetika. Gorga: Jurnal Seni Rupa, 7(2), 112–121.
Suharson, A., Subiharto, J., Asmara, D. A., & Fitriani, D. (2025). Proposal Program Inovasi Seni Nusantara: GERA-STONE Media Keramik Terbarukan untuk Peningkatan Kualitas, Diversifikasi Desain Produk, Nilai, dan Keberlanjutan Produk Gerabah di Pundong Bantul.
Wahyuningsih, N., Bahari, N., Amboro, J. L., & Kartikasari, N. (2023). Transformasi Bentuk dan Desain Gerabah Desa Bentangan, Klaten. Brikolase: Jurnal Kajian Teori, Praktik Dan Wacana Seni Budaya Rupa, 15(2), 251–267. https://doi.org/https://doi.org/10.33153/brikolase.v15i2.5610
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Arif Suharson, Joko Subiharto, Dwita Anja Asmara, Dyah Retno Fitriani
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Copyright
Authors published in this journal agree to the following terms:
- The copyright of each article is retained by the author (s).
- The author grants the journal the first publication rights with the work simultaneously licensed under the Creative Commons Attribution License, allowing others to share the work with an acknowledgment of authorship and the initial publication in this journal.
- Authors may enter into separate additional contractual agreements for the non-exclusive distribution of published journal versions of the work (for example, posting them to institutional repositories or publishing them in a book), with acknowledgment of their initial publication in this journal.
- Authors are permitted and encouraged to post their work online (For example in the Institutional Repository or on their website) before and during the submission process, as this can lead to productive exchanges, as well as earlier and larger citations of published work.
- Articles and all related material published are distributed under a Creative Commons Attribution-ShareAlike 4.0 International License.
License
Gorga : Jurnal Seni Rupa is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
